Model No-GRO-060
৳ 16,500.00
Just Call Now for More Details :+880 1762 454419, +880 1762 125304
Fifth stage Reverse Osmosis Water Purification System designed for where feed water
has very low water pressure or where the source water contains higher than normal
amounts of dissolved solids.
has very low water pressure or where the source water contains higher than normal
amounts of dissolved solids.
Description
RO Offers safe, good-tasting water at your fingertips
It meets all your water quality needs. with 50/100 gallons of clear, refreshing water that is not only healthy
to drink, but good for cooking. RO system provides safe, pure water using Reverse Osmosis Technology. It
is one of the finest units in its class. It’s capable of removing over 95% of total dissolved solids, +99% of all
organics and +99% of all bacteria.
to drink, but good for cooking. RO system provides safe, pure water using Reverse Osmosis Technology. It
is one of the finest units in its class. It’s capable of removing over 95% of total dissolved solids, +99% of all
organics and +99% of all bacteria.
This system hides away under your sink and puts healthy great-tasting water at your fingertips. It meets all
your water quality needs. Our RO comes complete with a NSF certified 3.2 gallons water storage tank and
all the necessary fittings, installation kits, extra color 1/4″ tubing, and a long-reach chrome faucet. We don’t
know of any other system at our price that can approaches its performance.
your water quality needs. Our RO comes complete with a NSF certified 3.2 gallons water storage tank and
all the necessary fittings, installation kits, extra color 1/4″ tubing, and a long-reach chrome faucet. We don’t
know of any other system at our price that can approaches its performance.
Features:
• 3.2 Gallons NSF Standards Water Storage Tank.
• FDA Approved Polypropylene Made Flat Cap Housing.
• Flow Restrictor, and non return Valve.
• Feed water connector & deliver valve
• Drain Saddle Valve
• FDA Approved Polypropylene Made Flat Cap Housing.
• Flow Restrictor, and non return Valve.
• Feed water connector & deliver valve
• Drain Saddle Valve
• Four Color Coded 1/4 inch Tubing for System Connection
• Completely Assembled & Water leaking testing
• 100% Factory Tested and Sterilized Ready for Installation.
• Installation Instruction.
• Completely Assembled & Water leaking testing
• 100% Factory Tested and Sterilized Ready for Installation.
• Installation Instruction.
First Stage: Sediment Filter
The Sediment filter cartridge is manufactured from pure 100% polypropylene fibers. The fibers have been
carefully spun together to form a true gradient density from outer to inner surfaces. It is effective in removing
dust, mud, rust and sand particles.
carefully spun together to form a true gradient density from outer to inner surfaces. It is effective in removing
dust, mud, rust and sand particles.
Second Stage: Granular Activated Carbon Filter
This granular activated carbon filter is composed of high-performance activated carbon that effectively
reduces unwanted tastes, odor, organic contaminants, chlorine, pesticides and chemicals that contributed
to taste and odor. It is designed to allow maximum contact between the water and carbon, ensuring maximum
adsorption.
reduces unwanted tastes, odor, organic contaminants, chlorine, pesticides and chemicals that contributed
to taste and odor. It is designed to allow maximum contact between the water and carbon, ensuring maximum
adsorption.
Third Stage: Activated Block Carbon Filter
This block carbon filter is composed of high-performance Coconut Shell carbon using a patented process
and made entirely from FDA-compliant materials that highly effective at reducing 17 hazardous metals:
such as lead, radon, mercury, insecticides, odor and chlorine: taste & odor, from potable drinking water. The
unique structure of the carbon block enables it to reduce Giardia, Cryptosporidium, amoeba, and Toxoplasma
cysts and fine sediment particles down to 0.5 microns. It is an ideal choice for a wide range of residential,
food service, commercial and industrial applications.
and made entirely from FDA-compliant materials that highly effective at reducing 17 hazardous metals:
such as lead, radon, mercury, insecticides, odor and chlorine: taste & odor, from potable drinking water. The
unique structure of the carbon block enables it to reduce Giardia, Cryptosporidium, amoeba, and Toxoplasma
cysts and fine sediment particles down to 0.5 microns. It is an ideal choice for a wide range of residential,
food service, commercial and industrial applications.
Fourth Stage: Reverse Osmosis (RO) Filter
Reverse Osmosis utilizes the unique properties of a semi-permeable membrane to allow fluid to pass while
restricting the flow of dissolved ionic material. With pressure applied to impure water on the side of such
membrane materials, pure water will pass through, leaving most of the impurities behind. The rejection of
the dissolved ionic material is a function of both molecular weight and ionic charge. For example, we can
expect a nominal 90% rejection of sodium chloride, which means that the product water passing through
the membrane will have a concentration of salt approximately one-tenth that of the feed water. The rejection
of calcium carbonate (hardness) will be near 95%, while most metallic salts will be rejected at a rate
of approximately 98% to 99%.
The rejection of non-ionic or organic material is primarily by mechanical filtration. Most substances with a
molecular weight of over 100 will be completely rejected by an intact reverse osmosis membrane. Low
molecular weight organics, such as formaldehyde or phenol, can pass freely through an R.O. membrane, as
can most dissolved gasses. Oil, suspended solids and particulate matter are mechanically filtered, as are
viruses, bacteria, pyrogen, and larger organic molecules.
restricting the flow of dissolved ionic material. With pressure applied to impure water on the side of such
membrane materials, pure water will pass through, leaving most of the impurities behind. The rejection of
the dissolved ionic material is a function of both molecular weight and ionic charge. For example, we can
expect a nominal 90% rejection of sodium chloride, which means that the product water passing through
the membrane will have a concentration of salt approximately one-tenth that of the feed water. The rejection
of calcium carbonate (hardness) will be near 95%, while most metallic salts will be rejected at a rate
of approximately 98% to 99%.
The rejection of non-ionic or organic material is primarily by mechanical filtration. Most substances with a
molecular weight of over 100 will be completely rejected by an intact reverse osmosis membrane. Low
molecular weight organics, such as formaldehyde or phenol, can pass freely through an R.O. membrane, as
can most dissolved gasses. Oil, suspended solids and particulate matter are mechanically filtered, as are
viruses, bacteria, pyrogen, and larger organic molecules.
To carry the rejected material away from the membrane
surface, the feed side of the R.O. membrane is
continually flushed with an excess flow, usually two
to five times the product flow. This avoids clogging of
the membrane surface and reduces the tendency
toward scale formation.
surface, the feed side of the R.O. membrane is
continually flushed with an excess flow, usually two
to five times the product flow. This avoids clogging of
the membrane surface and reduces the tendency
toward scale formation.
Fifth Stage: Taste and odor Filter
This granular activated carbon filter is composed of
high-performance activated carbon that effectively
reduces unwanted tastes, odor, organic contaminants,
chlorine, pesticides and chemicals that
contributed to taste and odor. It is designed to allow
maximum contact between the water and carbon,
ensuring maximum adsorption. We are using NSF
approved post carbon to guarantee the taste of
water.
high-performance activated carbon that effectively
reduces unwanted tastes, odor, organic contaminants,
chlorine, pesticides and chemicals that
contributed to taste and odor. It is designed to allow
maximum contact between the water and carbon,
ensuring maximum adsorption. We are using NSF
approved post carbon to guarantee the taste of
water.
Contaminants Average Percent
Reduction
Arsenic- 99.99
Barium -98.90
Cadmium- 99.60
Chromium (Hexavalent)- 99.99
Chromium (Trivalent) -97.00
Copper -99.0
Cysts -100
Turbidity- 98.50
Fluoride -97.9
Lead -99.99
Perchlorate- 96.5
Total Hardness- 100
Selenium -92
TDS -97
Reduction
Arsenic- 99.99
Barium -98.90
Cadmium- 99.60
Chromium (Hexavalent)- 99.99
Chromium (Trivalent) -97.00
Copper -99.0
Cysts -100
Turbidity- 98.50
Fluoride -97.9
Lead -99.99
Perchlorate- 96.5
Total Hardness- 100
Selenium -92
TDS -97
No comments:
Post a Comment